Resources › Planning
How to clean a headstone safely
To clean a headstone, wet it with plain water, scrub it gently with a soft brush, and rinse it well. Do not use bleach, a pressure washer, or a wire brush. These can damage the stone. If the stone is cracked, flaking, or loose, do not clean it. Call the cemetery instead.
Before you start
- Ask the cemetery. Some cemeteries have rules on who may clean a stone and what may be used. The office can also tell you what the stone is made of.
- Check the stone. Look for cracks, flaking, a loose base, or a lean. A weak stone can break or fall. Leave it alone and tell the cemetery.
- Know the stone. Granite is hard. Marble, limestone, and sandstone are softer and wear away more easily, so use only water and a soft brush on them.
What you need
- Clean water, and enough of it. Bring your own, because many cemeteries have no tap near the grave.
- A soft brush with natural or plastic bristles. Do not use wire or hard bristles.
- Soft cloths or sponges.
- A small amount of non-ionic detergent, only if water alone does not work. Stone conservators commonly suggest this type. Mix a few drops in water and ask the cemetery first.
Steps
- Pick a mild, cloudy day. Avoid hot sun and freezing weather.
- Remove loose dirt, leaves, and grass with your hand or the soft brush.
- Wet the whole stone with water.
- Scrub gently with the soft brush, starting at the bottom and working up. Use light pressure and small circles.
- Rinse with plenty of clean water, from the top down, so no soap or dirt dries on the stone.
- Let the stone dry in the air.
Moss and lichen can take several gentle cleanings to fade. Do not scrape them off. Rushing can scratch the stone.
What not to use
- Bleach and household cleaners.
- Vinegar, acids, and other strong chemicals.
- Pressure washers.
- Wire brushes, metal tools, and rough pads.
- Paint, sealers, and coatings.
Bronze markers
For a bronze marker, rinse it with water and wipe it with a soft cloth. Do not scrub it hard. Ask the cemetery or the dealer how the marker was finished before you use any product on it.
When to ask for help
Ask the cemetery or a monument dealer if the stone is old, fragile, or badly stained, or if the lettering is hard to read. Do not try to repaint or recut the letters yourself.
Choosing a new stone? Read how much a headstone costs or look up a cemetery in our directory to find its contact details.